Select all that apply:


  • Staff Type

  • Academic Title


  • Departments


  • Units


  • Research Areas

Faculty & Staff

NameContact
No matches
No Image AvailableKelly  Bader
Clerical Assistant, Department of Mechanical Engineering
kelly.bader@usask.ca
(306) 966-5440
Donald J. BergstromDonald J. Bergstrom  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Interim Dean

Associate Dean Research

Professor of Mechanical Engineering
engr.dean@usask.ca
(306) 966-5593
Computational Fluid Dynamics; Turbulence Modelling; Wind tunnel modelling of external flows
No Image AvailableRobert W. Besant  B.Sc.,  M.S.E.
Professor Emeritus of Mechanical Engineering
bob.besant@usask.ca
(306) 966-5443
HVAC moisture transfer in buildings; Air-to air energy recovery
Douglas V. (Doug) BitnerDouglas V. (Doug) Bitner  B.E.,  M.Sc., Professional Affiliate
Departmental Assistant - Mechanical Engineering
doug.bitner@usask.ca
(306) 966- 5462
Fluid Power Systems, Control Systems, Mechatronics
James D. BuggJames D. Bugg  B.E.,  M.A.Sc.,  Ph.D., P. Eng
Interim Associate Dean College Operations

Professor of Mechanical Engineering
engr.operationsdean@usask.ca
(306) 966-5561
Particle Image Velocimetry; Experimental Fluid Dynamics; Bubble Dynamics; Taylor Bubbles
Richard T. BurtonRichard T. Burton  B.E.,  M.Sc.,  Ph.D.
Professor Emeritus of Mechanical Engineering
richard.burton@usask.ca
Fluid Power Systems; Artificial Intelligence and Neural Networks
Daniel ChenDaniel Chen  Ph.D., P. Eng
Professor of Mechanical Engineering

Professor of Biomedical Engineering
xbc719@mail.usask.ca
(306) 966-1267
Tissue Engineering; Scaffold Bio-fabrication; Mechatronics; and Nano-Positioning
Duncan CreeDuncan Cree  D.E.C.,  B.Eng.,  M.Eng.,  Ph.D., P.Eng
Assistant Professor of Mechanical Engineering
duncan.cree@usask.ca
(306) 966-3244
Sustainable Materials; Advanced Engineering Materials; Polymers; Composites Processing; Natural Fibres; Bio-Resins; Mechanical Properties, Testing and Microstructural Characterization
No Image AvailableTrever G. Crowe (on leave)  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering

Associate Dean CGSR
trever.crowe@usask.ca
(306) 966-5759
Livestock transport; Animal welfare; Livestock production
Allan T. DolovichAllan T. Dolovich  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Associate Professor of Mechanical Engineering
allan.dolovich@usask.ca
(306) 966-5471
Solid mechanics ;Nonlinear stress analysis ;Experimental methods
No Image AvailableMelanie Fauchoux  B.E.,  M.Sc.,  Ph.D., E.I.T.
Departmental Assistant - Mechanical Engineering
melanie.fauchoux@usask.ca
(306) 966-5446
Heat Transfer
Reza FotouhiReza Fotouhi  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering
reza.fotouhi@usask.ca
(306) 966-5453
Robotics (dynamics & control); Structural Dynamics and Vibrations; Computational Mechanics (Finite Element & Optimization); Biomechanics
No Image AvailableRichard  Griffin  Ph.D., P. Eng.
Adjunct Professor of Mechanical Engineering
richard.griffin@qatar.tamu.edu
001-974-424-0024
Huiqing GuoHuiqing Guo  B.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering
huiqing.guo@usask.ca
(306) 966-5350
HVAC, Air quality control, Environment control for agricultural buildings, Air emission and dispersion monitoring and modelling
Madan M. GuptaMadan M. Gupta  B.E.,  B.Sc.,  M.Eng.,  Ph.D.,  D.Sc.
Professor Emeritus of Mechanical Engineering
Madan.Gupta@usask.ca
(306) 966-5451
neuro-vision; neuro-control; fuzzy logic; neural networks; fuzzy neural networks
Saeid HabibiSaeid Habibi  B.Sc.,  Ph.D., P. Eng (Ontario)
Adjunct Professor of Mechanical Engineering
habibi@mcmaster.ca
(905) 525-9140 (ext 27765)
Mechatronics; Multivariable and Intelligent Control; Robotics; Fluid Power; Water Supply Management
Assem HedayatAssem Hedayat
Professional Affiliate of Mechanical Engineering
assem.hedayat@usask.ca
(306) 966-5124
Biomaterials and nanofabrication
Barry HertzBarry Hertz  B.E.,  M.Sc., P. Eng
Professor Emeritus of Mechanical Engineering
barry.hertz@usask.ca
(306) 966-5430
Vehicular transportation efficiency; Vehicle aerodynamics; Wind tunnel testing
James (J.D.) JohnstonJames (J.D.) Johnston  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Associate Professor of Mechanical Engineering
jd.johnston@usask.ca
(306) 966-1468
Biomechanics; Medical Imaging; Computational Mechanics (Finite Element & Modelling)
No Image AvailableDavid Male
Professor Emeritus of Mechanical Engineering
Emily McWalterEmily McWalter  B.Sc.,  M.A.Sc.,  Ph.D.
Assistant Professor of Mechanical Engineering
emily.mcwalter@usask.ca
(306) 966-5298
Quantitative MRI techniques to understand knee joint and soft tissue function in degenerative diseases such as osteoarthritis.
No Image AvailableMike Miller
Lab Coordinator - Mechanical Engineering
michael.miller@usask.ca
(306) 966-5330
No Image AvailablePeter N. Nikiforuk  B.Sc.,  Ph.D.,  D.Sc.
Professor Emeritus of Mechanical Engineering

Dean Emeritus of Engineering
peter.nikiforuk@usask.ca
(306) 966-5463
Robotics (dynamics & control)
Scott NobleScott Noble  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Assistant Professor of Mechanical Engineering
scott.noble@usask.ca
(306) 966-5308
Spectroscopy, Hyperspectral Imaging, Machine Vision, Process Monitoring, Pneumatic Conveying, and Agricultural Machinery
Akindele G. OdeshiAkindele G. Odeshi  B.Tech.,  M.Eng.,  Ph.D., P.Eng.
Associate Professor of Mechanical Engineering
akindele.odeshi@usask.ca
(306) 966-5118
Physical metallurgy; microstructure design; engineered materials; composite materials; high strain-rate testing and evaluation; failure and fracture
Ikechukwuka N. OguochaIkechukwuka N. Oguocha  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Associate Professor of Mechanical Engineering
ike.oguocha@usask.ca
(306) 966-7832
Characterization of Decomposition Reactions in Metallic Alloys and Metal Matrix Composites; Interface Phenomena in Metal Matrix Composites; Wear of Engineering Materials
No Image AvailablePuren Ouyang
Adjunct Professor of Mechanical Engineering
pouyang@ryerson.ca
(416) 979-5000 (ext. 4928)
Mechatronics; robotics; design and control; hybrid systems
No Image AvailableRob Peace  B.E.,  M.Sc., P. Eng.
Departmental Assistant - Mechanical Engineering
rob.peace@usask.ca
(306) 966-5461
Manufacturing; Materials Testing
No Image AvailableShawn Reinink  B.E.,  M.Sc.
Departmental Assistant - Mechanical Engineering
shawn.reinink@usask.ca
(306) 966-5460
Thermal Science; Fluid Mechanics
Richard RetzlaffRichard Retzlaff  B.E.,  M.Sc., P. Eng
Assistant Professor of Mechanical Engineering
rick.retzlaff@usask.ca
(306) 966-5457
Engineering Education, Engineering Design and Prototyping, Director: Shad Valley
Janai RussellJanai Russell
Administrative Assistant, Department of Mechanical Engineering (On Leave)
janai.russell@usask.ca
(306) 966-5442
No Image AvailableColin Sargent
Professor Emeritus of Mechanical Engineering
colin.sargent@usask.ca
Greg J. SchoenauGreg J. Schoenau  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Professor Emeritus of Mechanical Engineering
greg.schoenau@usask.ca
(306) 966-5446
Energy conservation in building systems; Fluid power control systems; Building daylighting systems
Carey J. SimonsonCarey J. Simonson  B.E.,  M.Sc.,  Ph.D., P.Eng.
Professor of Mechanical Engineering

Graduate Chair, Mechanical Engineering
carey.simonson@usask.ca
(306) 966-5479
Moisture transfer in buildings; Air-to-air energy recovery; Heat and mass transfer in porous media; frosting and fouling of heat exchangers
David SumnerDavid Sumner  D.E.C.,  B.Eng.,  M.A.Sc.,  Ph.D., P.Eng.
Professor of Mechanical Engineering

Undergraduate Chair
david.sumner@usask.ca
(306) 966-5537
Experimental fluid mechanics; bluff-body aerodynamics; fluid-structure interactions
Jerzy A. Szpunar Jerzy A. Szpunar  Ph.D.
Professor of Mechanical Engineering

Canada Research Chair (Tier I) of Advanced Materials for Clean Energy
jerzy.szpunar@usask.ca
(306) 966-5374
Deformation and recrystallization processes in metals; Structure and properties of thin films; Electronic interconnects; High temperature oxidation and corrosion; Synergy of wear, Erosion and corrosion; Applications of X-ray and neutron diffraction techniques; Hydrogen ingress into nuclear materials; Intergranular fractures; Fatigue and failure; and Superplasticity and other special properties of nanocrystalline materials
Walerian SzyszkowskiWalerian Szyszkowski  M.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering
walerian.szyszkowski@usask.ca
(306) 966-5472
Flexible Structures;Optimization; Computational Mechanics; Time-Dependent Materials; Holographic Interferometry
David A. TorviDavid A. Torvi  B.Sc.,  M.Sc.,  Ph.D., P.Eng.
Professor of Mechanical Engineering

Head of the Department of Mechanical Engineering
david.torvi@usask.ca
(306) 966-5493
Numerical and experimental heat transfer;Fire science ;Heat transfer in human skin ;Protective clothing
No Image AvailablePaul Ukrainetz
Professor Emeritus of Mechanical Engineering
paul.ukrainetz@usask.ca
(306) 966-5430
No Image AvailableSonia Vanderby  B.A.Sc.,  Ph.D.
Adjunct Professor, Joint Appointment in Mechanical Engineering and Medical Imaging
sonia.vanderby@usask.ca
(306) 966-5804
Operations Research applied to health services; simulation; modeling; system dynamics; diagnostic imaging; osteoarthritis
Ross WelfordRoss Welford  B.E.,  M.Sc., P.Eng
Part-Time Assistant Professor of Mechanical Engineering
raw062@mail.usask.ca
(306) 966-5323
Agricultural Machinery, Precision Agriculture
Travis WiensTravis Wiens  B.E.,  M.Sc.,  Ph.D., P. Eng
Assistant Professor of Mechanical Engineering
t.wiens@usask.ca
(306) 966-1241
Fluid Power (Hydraulics), Acoustic Sensing, Dynamic Modelling, Mining, Mechatronics
Fang X. WuFang X. Wu  B.Sc.,  M.Sc.,  Ph.D., P.Eng.
Professor, Department of Mechanical Engineering and Division of Biomedical Engineering

Graduate Chair, Division of Biomedical Engineering
fangxiang.wu@usask.ca
(306) 966-5280
Bionetwork analysis, Network control theory and its applications, Drug target identification, Biomedical signal and image processing and analysis, System identification and parameter estimation, Large scale biological data analysis, Machine learning
Qiaoqin YangQiaoqin Yang  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering


qiaoqin.yang@usask.ca
(306) 966-5470
Nanostructured thin films/coatings; Friction wear and corrosion; Tools and biomedical implants; Plasma and ion beam deposition and etching
W.J. (Chris) ZhangW.J. (Chris) Zhang  B.Sc.,  M.Sc.,  Ph.D., P. Eng
Professor of Mechanical Engineering
chris.zhang@usask.ca
(306) 966-5478
Mechanical Design; Manufacturing; Dynamic System and Control; MEMS; Informatics; Robotics
No Image AvailableNan fang Zhao  B.Eng.,  M.Sc., E.I.T.
Departmental Assistant - Mechanical Engineering
naz410@mail.usask.ca
(306) 966-5459
Metallurgy, Materials Science
No Image AvailableYue (Lily) Zhu
Graduate Assistant, Mechanical Engineering
engr-me-grad.inquiries@usask.ca
(306) 966-5444